Posted by George Wright
Mon, 16 Jul 2007 23:12:00 GMT
So, this year I decided to go to GUADEC. This is mainly because Collabora were willing to send me and cover things like hotel fees and travel.
It’s certainly a bit different to aKademy. For a start, it seems to be a lot less aimed at uniting free software developers (which is the impression I’ve found at aKademy) and more geared towards corporate awareness. I think this reflects in the fact that everyone has to pay a conference fee (unlike aKademy) and there are far more corporate delegates.
There’s also no concept of a ‘hacking room’ like at aKademy and the internet connection is much worse (two 8Mbit ADSL lines bonded together shared between 400-500 delegates), but it’s not too bad.
The talks here last all week instead of just on the weekend, which I think is probably better in this case as the delegates are normally sent here as part of their job, whereas aKademy is normally a personal commitment for the attendees, and so the different timings reflect those differences. There are lots of interesting talks lined up for the ”Core” schedule, which I will certainly try to get to.
Unfortunately, I’m only here until Wednesday as I’ve got The Imperial meeting starting on Thursday which I need to get to, but there are at least a lot of interesting talks on Tuesday and Wednesday which I’ll be able to attend.
And finally, I’ve managed to blag 7 free t-shirts so far this week, which is a definite win in my book!
3 comments
Posted by George Wright
Sat, 07 Jul 2007 17:24:00 GMT
If Fred suggests going to Pizza Hut for lunch, do not decide to make the Ice Cream Factory unlimited refill offer at Pizza Hut the only part of your lunch. It could have disastrous consequences.
2 comments
Posted by George Wright
Thu, 24 May 2007 00:00:00 GMT
This summer I’ve managed to land an internship at Collabora Ltd to work on freedesktop.org projects.
Collabora’s current projects include Telepathy, Farsight and Nice. I will be working on something related to one of those projects.
So far we’re still in the brainstorming phase of what to work on, but Rob is keen that I work on getting TCP-like stream properties (flow control, ordering guarantees, retransmissions etc) into Telepathy’s “Tubes”, so that applications can communicate using stream-like Tubes over whatever UDP connection ICE has NAT-traversed. This will effectively provide a generic method for applications utilising either D-Bus or their own protocol (over a SOCK_STREAM) to communicate through NAT routers whilst still speaking something like TCP.
Of course, I would like to get the community’s opinions on the projects and most of all I’d like suggestions on other things I can spend my time hacking on which will benefit the populace at large. Any criticisms (constructive or otherwise) are welcome. The work will almost certainly be in glib but if there’s any relevant work that needs doing in KDE, Collabora may consider letting me work on that.
Posted in Cambridge, Computing, KDE | 4 comments
Posted by George Wright
Mon, 07 May 2007 02:42:00 GMT
I’ve finally got round to booking the train tickets to get to Glasgow for aKademy this June.
If anyone in London is travelling to Glasgow the trains I’m on are:
London to Glasgow, 29/06/2007 - departing London Euston at 11:46 and arriving at Glasgow Central at 16:55. Virgin Trains.
Glasgow to London, 08/07/2007 - departing Glasgow Central 10:55 and arriving at London King’s Cross at 16:45. GNER.
Would be great if any KDE people are on either of those trains. For those who haven’t booked yet, those trains are the cheapest ones I could find on those days - it came to a total of £47 for two single tickets (both standard class), booked through the GNER website.
Posted in KDE | 1 comment
Posted by George Wright
Mon, 26 Feb 2007 00:22:00 GMT
The second day of FOSDEM was good fun. The night before was not so fun. After having dinner with a bunch of KDE developers, I decided to go and try to find the hotel I was staying in. After two and a half hours of running around Brussels like a headless chicken carrying a few tonnes of computers on my back, I finally managed to get to the hotel we were staying in - the Hotel Continental.
For those who don’t know, the Hotel Continental was the cheapest hotel I could find using Google that was in Brussels. It’s literally right next to the Bruxelles-Midi station and a twin room costs 61.50 EUR per night. The downside? The room is terrible. The wardrobe door fell apart when we tried to open it, the room was tiny and there wasn’t a shower anywhere near the room. However, it wasn’t all terrible. The staff were exceptionally friendly and courteous, the beds were comfortable and the breakfast was quite nice, which made the whole experience much more pleasant than it could have been. If you don’t mind a cheap place to stay that’s nicer than a youth hostel I think the Hotel Continental is quite a nice place to stay.
As for the conference itself, I finally managed to meet Lorn Potter today. I’ve known him for years due to my interest/work in Opie and Qtopia but as he’s located in Australia I’ve never had the opportunity to meet him, so it was great to finally meet him today. The rest of the time was spent trolling on the Debian booth and being viciously attacked by Nattie of #debian-uk fame, who has now surpassed Jes Hall and Lauri Watts on my top ten list of people to hate for touching my hair.
Anyway - it was a great conference and I hope to see many of you again next year!
Posted in KDE, Computing | 5 comments
Posted by George Wright
Sat, 24 Feb 2007 16:06:00 GMT
Today has been a long day for me. In my ineptitude, I booked a Eurostar from London to Brussels at 6:06 am which meant that I had to get up stupidly early (2:30am) to get to Waterloo on time. The Eurostar was a very good ride though, and it was made more interesting by tracking our route on Maemo Mapper using a GPS. Apparently the top speed we hit was 190.1 miles per hour somewhere in France, and the total journey time from Waterloo to Brussels Midi was 2h37m.
When we got to Brussels we managed to get spectacularly lost on the tram system to the University. Nobody told us there were TWO campuses in south Brussels both called “Universite Libre de Bruxelles”. Luckily the GPS was incredibly useful at this point as I had already added the GPS coordinates of FOSDEM to it and we ended up walking to the conference.
As conferences go, FOSDEM appears to be fairly typical of an open source one. There are LOTS of parallel tracks and it’s impossible to attend even one fifth of the available talks. There are literally thousands of people here and so I’ve been spending most of the day sifting through the crowds and trying to find familiar faces. I’m currently in the OpenMoko talk as it appears to be one of the most interesting projects of the year. They appear to be spot on as to their development model and organisation, but we’ll have to see how well it all goes. I personally am very excited by the prospect of taking the OpenMoko software system and hacking it onto my phone.
I hope to get to more talks tomorrow but for now I think I need to get some sleep and some university work done!
Posted in KDE | 1 comment
Posted by George Wright
Thu, 22 Feb 2007 06:53:00 GMT
Well, it looks like my ThinkPad T43p has decided to die. A few months ago the UltraNav touchpad/trackpoint combination thing decided to start being faulty, in that it would randomly stop working and then only start working again when it felt like it (a reboot didn’t fix the problem, and no mouse was detected by the kernel if I did reboot), which was a pain.
So today I rebooted the laptop and what am I greeted with upon next boot? The following error message splurted out over and over again:
translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Really not my idea of fun. A hard disk failure - the most annoying thing in the world. Luckily I managed to get the hard disk into a USB caddy and copy the entire home partition off it, but it seems the hard disk really is faulty as dd if=/dev/sdi of=/dev/zero on my desktop (where sdi is the disk) gets the following sent to dmesg:
[19135224.412000] sd 23:0:0:0: SCSI error: return code = 0x8000002
[19135224.412000] sdi: Current: sense key: Medium Error
[19135224.412000] Additional sense: Unrecovered read error
[19135224.412000] end_request: I/O error, dev sdi, sector 61507808
[19135224.412000] Buffer I/O error on device sdi, logical block 7688476
[19135322.864000] sd 23:0:0:0: SCSI error: return code = 0x8000002
[19135322.864000] sdi: Current: sense key: Medium Error
[19135322.864000] Additional sense: Unrecovered read error
[19135322.864000] end_request: I/O error, dev sdi, sector 61507816
[19135322.864000] Buffer I/O error on device sdi, logical block 7688477
Oh the joy. I’ve now contacted Lenovo/IBM to see what they can do for me under warranty, and upon reading the warranty documentation it seems the trackpad and disk drive are customer replacement units so hopefully I won’t even have to send it in! Hooray for sane warranty agreements! :)
Posted in Computing | 6 comments
Posted by George Wright
Mon, 19 Feb 2007 13:22:00 GMT
Thanks to the response of my previous blog about the NX client I’m now working on for the 770, I’ve come to the conclusion that the best way to allow GTK to interact with the client library I wrote would be to implement a D-Bus interface in addition to the standard C++ interface so that the library can work much more cleanly with other toolkits (and hopefully even other languages!). Unfortunately, this is going to be on hold for at least a few days while I sort out my university work… It’s going to be quite a cool project though!
For the first time this year, I’ve finally decided to go to FOSDEM. In previous years it’s always been during term time and as I was at a boarding school I could never go, but now that I’m at university I’ve decided to just take the plunge and go (besides, Alasdair Kergon told me that I absolutely had to come this year). If anyone I know is going give me a shout and I’ll see if I can find you amongst the large crowd of (possibly drunken) geeks! I’ll be leaving Waterloo on the 6:06am Eurostar to arrive in Brussels somewhere around 9:30am and returning on a Eurostar departing sometime around 9pm on Sunday.
Posted in KDE, Computing | no comments
Posted by George Wright
Sun, 18 Feb 2007 04:54:00 GMT
So recently I managed to acquire a Nokia 770 internet tablet (thanks to mjg59). It’s a really nifty device – the screen on it is unparalleled (except, obviously, for the N800 – whose screen is slightly better), and it has quite a nice Linux platform on it. The problem? It runs Hildon, which is GTK-based. The input methods are heavily integrated into the GTK on the device and using any other widget toolkit just doesn’t work (well, it does, but you’re going to need a physical keyboard).
In light of this, I decided to start hacking around with GTK. Its API is not as pretty as Qt in my opinion, but it’s not too shoddy. It just takes a bit of getting used to, although the really verbose function names and endless requirement to call them really annoys me (gtk_foo_bar_baz_lala_eggs_breakfast() anyone?).
Armed with NXClientLib which I developed for my Summer of Code project last year, I decided to try and port my NX client to Hildon. In typical style, I made the architectural decision last year to write the library in C++ and link to QtCore/QtXml simply because it made my life a whole lot easier (I would dread to think how much extra code I’d need to write if I didn’t have QString). Anyway, I’m currently in the process of gluing GTK and Qt together in perfect harmony (haha) so that NX can take over the world, but it’s proving to be less trivial than I thought it would be.
Some gratuitous screenshots:
The initial login interface
The window automagically changes the layout for the on-screen keyboard
I’m afraid that’s all there is to “Maemo NX” thus far. I’ve spent most of the time trying to learn how GTK/X11 works and also thinking how best to implement the whole thing. If anyone is an expert at X window reparenting in GTK I’d be most grateful if they could take a look at this code and let me know why it doesn’t reparent the X window whose ID is specified by int wid into the GTK window I create and then make the reparented window visible. It seems to reparent fine, as the window with id wid disappears, but there’s no sign of it in the GTK window. If I can’t get this to work I’ll simply use mozplugger-helper which does a fine job of reparenting a window, but the fewer dependencies I can have the happier I’ll be.
If anyone’s interested in the code so far, it can be found in the FreeNX subversion repository at http://svn.berlios.de/viewcvs/freenx/nxclientlib/maemonx/.
Posted in Computing, KDE | 8 comments
Posted by George Wright
Sun, 31 Dec 2006 02:26:00 GMT
For those of you that don’t know, I have an HTC Universal phone. I have two main priorities for this thing - firstly, to get Linux booted on it with the phone hardware working nicely, and secondly to get NX working on it (yes, I’m strange).
Today was the first day in ages that I’ve actually decided to do anything. Those of you that met me in Ireland at aKademy will know that I was working on bootstrapping Debian Sarge on it without much success. Well, today, I managed to bootstrap an almost fully working Etch system without too much difficulty (and by that I mean it only took me 14 hours to do..).
Anyway, it was installed by running
debootstrap --include=wireless-tools,hotplug --arch arm --foreign etch /etch http://ftp.uk.debian.org/debian
at first on my desktop, then copying the entire directory over to my 2GB SD card. I had to create /dev/mmcblk0p1 and /dev/mmcblk0p2 though, and pass the kernel parameters rootdelay=3 root=/dev/mmcblk0p2 init=/bin/bash for it to be usable. When I got to bash I could then run debootstrap --second-stage which finished the bootstrap process.
After all that I installed kdrive from the 720degrees project but ended up having to replace the Xfbdev binary with that from one of the pre-built Universal GPE tarballs as it didn’t seem to have support for VGA modes.
In any case, I’ve now got X11 to run semi nicely, but the lack of a working touch screen is a bit infuriating at the moment.
I’m still trying to work out how tslib works - it seems to be a bit of a weird library. I can create the device /dev/input/event0 and get output from it when I tap on the screen, but Xfbdev always moves the cursor to the top right if I try and specify that as the tslib device. If anyone knows about how tslib works I’d be grateful if they could share it with me as documentation on it seems to be rather sparse.
I intend to get more working soon, but for now, I’m pretty washed out after all the fiddling I’ve done today. On the todo is to get the phone hardware to work, write a telepathy backend for the phone hardware and experiment with various desktop environments or window managers to find which one is suitable (I have a pet hatred for qtopia/opie/gpe. They’re all rubbish.). I’d also like to get the wireless working more reliably (I’m having to use the usbnet at the moment) and also write a keymap for the keyboard that isn’t rubbish. Ah the joys of embedded Linux.
Posted in Computing | 12 comments
